Poly Film Accessories

Poly Film Accessories
[ Home ] [ Up ] [ Polylock ] [ Poly Film Accessories ]

Hydro-Gardens
P.O. Box 25845
Colorado Springs, CO 80936-5845
888-693-0578
hgi@hydro-gardens.com

Ordering / Shipping Information | Your Shopping Cart Basket

Para traducir nuestro Web site a español, chascar aquí entonces inscriben www.hydro-gardens.com
en “traducen el espacio de un Web page”. Eligió “inglés-español” entonces golpean “traducen” el botón.

POLY-FILM COVERING ACCESSORIES

POLY COVER MENDING TAPE

The best patching tape for greenhouse poly covers. The tape is actually greenhouse poly-film with an adhesive back. Has UV inhibitors. 4" X 108 ft. roll.

Part #	Wght	Qty	Price
8C333	1.5 # Per Roll	1-11 Rolls	$17.25/roll
		12-23 Rolls	$15.95/roll
		24 Rolls	$13.85/roll

POLY BATTEN TAPE

White vinyl: Eliminates need for wood batten strips. For fastening any type poly to wood. Should have 4 staples per foot. Holds well in all weather. 500 foot roll X 3/4" Wide

Part #	Weight	Price
5C755	7.0#	$25.95

Fan Only Pictured	AIR INFLATION FANS Squirrel cage fans move 60 and 70 CFM with direct drive 115V, .42 AMP and .74 AMP thermally protected motors. Offer maximum efficiency and quiet air movement.	Inflation Kit Pictured
The larger fan should be used for poly covering areas over 3000 sq. ft., the smaller fan for areas of 3000 sq. ft. and less. Assembled inflation kits are very easy to install. They are per-wired with a 3 conductor cord set and have the 24" Air Inflation Jumper attached to the fan.

Part #	Description	Weight	Price
4C441	60 cfm fan only	3.5 #	$56.95
4C443	70 cfm fan only	4.0#	$77.95
6C441	60 cfm fan w/ inflation kit	3.81#	$75.95
6C443	70 cfm fan w/ inflation kit	4.31#	$104.95

AIR INFLATION JUMPER

For inflating two adjacent areas of poly with the same inflation fan. Will secure quickly and easily to both layers of poly with self-sealing 1/4 turn mounts. Made of flexible durable ABS plastic.

Part #	Description	Weight	Price
4C439	Inflation Jumper 36"	.40#	$14.95
4C440	Inflation Jumper 20"	.31#	$13.95

Photo Coming Soon

FOAM CLOSURE WEATHER STRIPPING

Required to seal the ends and sides of corrugated fiberglass against the greenhouse structural frame where the seal is not exposed to sunlight. These poly foam closure pieces are 1" X 1" X 6' and are adhesive backed. Peel the paper and they stick in place while you secure the fiberglass.

Part #	Weight	Quantity	Price
5C117	.13# Each	1 to 24	$2.20 / each
		25 to 99	$1.95 / each
		100 +	$1.80 / each

RUBBER CORRUGATED CLOSURE WEATHER STRIPPING

Required to seal the ends of corrugated fiberglass against the greenhouse structural frame. These corrugated closure pieces are 1" X 3'.

Photo Coming Soon

Part #	Weight	Quantity	Price
5C117R	.13# Each	1 to 10	$1.00 / each
		11 to 99	$.95 / each
		100 +	$.90 / each

FASTENERS

-	Part #	Description	Wgt./10	Price/10 @ 10	Price/10 @ 100
	5G141	1/4" - #14x1" TEK w/out washer (2 hole lug to steel)	1.50 #	$1.20	$0.93
	5G142	1/4" - #14x1" TEK with washer (fiberglass to steel)	1.94 #	$2.00	$1.50
	5G212	#12 X 2 1/2" TEK wafer (2" wood to steel)	2.09 #	$2.50	$2.23
	5G175	#10 X 3/4" TEK w/out washer (poly-lock to steel)	0.72 #	$0.80	$0.60
	5G176	#10 X 3/4" TEK with washer (fiberglass to steel)	0.94 #	$2.50	$1.60
	5G211	#10 X 1 7/16" TEK wafer (3/4 plywood to steel)	0.56 #	$2.50	$1.53
	5G125	1 1/4" alum. nail w/washer (fiberglass to wood)	0.20 #	$0.30	$0.20
	5G101	#12 X 3/4" Side lap screw & alum. nut (fiberglass to fiberglass)	0.10 #	$2.00	$1.70
	5G112	#10 X 1" hex head mach. screw (poly-lock to wood)	1.00 #	$0.60	$0.50
	5U386	3/8" X 10" turnbuckle - hook & eye (plant support wires)	0.75 # ea	$3.50 ea	$3.00 ea @ 5

All products & prices are subject to change at any time.

Hydro-Gardens
P.O. Box 25845
Colorado Springs, CO 80936-5845
888-693-0578
hgi@hydro-gardens.com

Credit Card use on the Internet