Hydro-Gardens
P.O. Box 25845
Colorado Springs, CO 80936-5845
888-693-0578
hgi@hydro-gardens.com

MC Plus® Series
4, 6, 8, 12, 18, 24,
30, 36 and 42 stations

    Design for commercial, light commercial and residential use, this high-performance solid-state controller from Irritrol Systems® offers optimal versatility for handling the demanding watering requirements of almost any application

    This is the most versatile solid state irrigation controller we have found. It has many features never before offered. It has the proven reliability of a microprocessor, versatile and as easy to program as your VCR. It is enclosed in a weather tight case and approved for outdoor use. Features such as split second accuracy, bright digital display, individual station lights, chargeable nicad batteries (included) to retain program memory, true dual programming, pump start station, and true manual by-pass makes this the best electronic timer on the market

Click Here for the Owner's Manual (PDF Format)

To read PDF Format Documents -

Very easy to program and operate, this timer will provide up to 14 on/off pairs per day.  The on-time length is adjustable in one minute increments from one minute to 23 hours. Programming Tip - You must specify days of the week for both the On and the Off times. It plugs directly into your convenience outlet. You plug your pump into the side of the timer. A setting can be for a particular day of the week, every day, only weekdays, only weekends, or every day but Sunday. The maximum output for a resistive or inductive load - 1800 watts (15 Amps; for lighting load - 960 Watts (8 Amps); for motors - 1/3 HP. The timer is 3" high, 2 1/2" wide, and 1 1/2" deep. It has a 3 prong plug, and comes with 2 batteries for memory backup. It weighs 5 1/4 oz.

Programming Instructions In English Click Here (PDF Format)

Programming Instructions In Spanish Click Here (PDF Format)

To read PDF Format Documents -

Heavy duty time switch built for dependable, automatic control of lighting, pumps, or CO2 generator operations. Provides up to 12 On-Off operations each day by adding extra trippers (1 set included, 11 additional sets may be added). Minimum setting, 1 hour. Permanently sealed and lubricated, long life clock motor. Snap out mechanism with large, easy to read dial that turns in either direction for fast setting. Rated 40 Amps. UL Listed. 125V, 60Hz.

Handles a wide range of cycle operations, process timing, intermittent pumping. Two single pole, single throw switches; one normally open, one normally closed/ Up to 12 On-Off operations, each operation individually adjustable from 10-60 mins. duration on 24 hour dial. Supplied with 3 adjustable trippers. Permanently sealed and lubricated long life clock motor. Snap out mechanism with large, easy to read dial that turns in either direction for fast setting. Manual lever for momentary "On". Rated 30 Amps per pole. 125V, 60Hz. UL List.

Adjustable cycle control has capacity for 1 to 12 operations daily with a minimum of 2 hours between operations. Applications include use with short range watering programs or lights. Operating time is adjustable between 30 seconds and 27 1/2 minutes in 30 second increments. Contacts rated 40A. UL Listed.

Provides up to 60 On-Off operations every cycle. 120 tripper slots in equal increments, 60 trippers included. Rated 20A. 125 VAC, 60 HZ.

Permanently attached trippers provide 96 On or Off operations in 15 minute increments every 24 hour period. Trippers push and out for fast, accurate settings. All trippers are furnished with time switch. Manual on-off lever. Widely used for controlling watering cycles in NFT systems. Rated 20 amps, 120V.